Advance Insulation Canada
Request FREE Insulation Quote
#1 Rated Expert Insulation Services
AIC has designed company protocols to leave your residential home, business, commercial space and agricultural property clean and tidy through the duration of every job.
Insulation Contractors Victoria Homeowners Compare
When you compare insulation contractors in Victoria, ask what happens before anyone sprays or blows a single square foot. Our visits start in the attic, crawl space or open wall: existing material and depth, venting, moisture staining, wiring, and how equipment and hose will reach the work area. From there the scope is quoted in writing at no cost, including what has to be removed, what can stay and what the finished assembly will look like.
Spray foam, polyurea coatings and intumescent paint are advanced insulation and coating products with mixing, substrate temperature and cure requirements, so the applicator and the equipment matter as much as the material. Advance Insulation Canada is COR certified in British Columbia and Alberta, and the same crews work across Greater Victoria, Sooke, Sidney and the Cowichan Valley.
House Insulation Victoria BC: Where the Heat Goes
Heat loss in older Victoria houses usually shows up in three places: a thin or settled attic, an uninsulated or partly insulated crawl space, and air leaks at the attic hatch, pot lights, plumbing stacks and rim joists. The home insulation services Victoria homeowners ask about most are attic top-ups, blown-in work, crawl space and basement insulation, and removal of damaged or rodent affected material before anything new is installed.
Wet coastal winters mean moisture control matters as much as added depth, so crawl space ground cover, venting and standing water get looked at during the same visit. We can also point you to the BC and Alberta rebate programs that apply to insulation upgrades and explain what each program asks for in documentation.
Commercial Insulation Fort McMurray AB: Shops, Warehouses and Camps
Our Fort McMurray office covers shop buildings, warehouses, camp structures, Quonsets and sea cans, with the same crews working into Edmonton and Calgary. Typical scopes include 2lb closed cell spray foam on steel and wood framed walls, roof decks and tanks, open cell foam for interior sound control, acoustical and thermal spray, and fireproofing with intumescent paint or protective coatings where the drawings call for it.
Cold weather changes the sequence. Substrate temperature, ventilation, containment and cure time are planned before the rig arrives, and work is often staged so occupied areas stay usable. We are members of ISNetworld and ComplyWorks, so prequalification and safety documentation are in place for contractor managed sites.
Rigid Foam Insulation and Where It Fits on Vancouver Island
Rigid boards are used where a flat, continuous layer works better than a cavity fill: foundation and basement walls, under slabs, crawl space perimeters and behind exterior cladding. On Victoria and Saanich homes we often pair board with spray foam, so the board carries the continuous layer while the foam seals rim joists and awkward framing. Boards are cut to fit, fastened or adhered, then seams are taped or foamed so air cannot track behind them. Thickness depends on the assembly and the depth available. Foam board insulation also comes up in sea can and Quonset retrofits, where wall depth is tight. If you are not sure whether rigid insulation or a sprayed product suits your build, we look at the assembly and framing first.
Batt Installation: Fiberglass and Mineral Wool Choices
Batts remain the practical choice for many wall, floor and interior partition assemblies. Fiberglass insulation batts are cut to fit the cavity, split around wiring and plumbing runs, and held snug without being compressed, since gaps, folds and squashed corners are where performance is lost. Mineral wool insulation is denser, holds a friction fit well, and is often chosen for sound control between bedrooms, offices or mechanical rooms, and for how it behaves in fire. We also install batt and poly assemblies where a vapour barrier is part of the design.
On Victoria, Langford and Colwood renovations we check for damp framing, rodent damage, old loose fill and compressed material before new batts go in, and remove what should not be closed up behind drywall.
Do you have a loft insulation installer Victoria BC homeowners can book for attic work?
Yes. Loft and attic describe the same space here. A crew measures existing depth, checks for moisture, rodent damage and blocked soffit vents, then air seals the ceiling plane at the hatch, wiring penetrations and top plates. Baffles keep the vent path open before blown-in material is added to the agreed depth, and depth markers are left behind. If the old material is contaminated or badly compressed, removal comes first.
High-efficiency insulation with an airtight seal for optimal temperature control.
WHAT OUR CUSTOMERS SAY
Give us a call today or fill out our online form for a FREE quote. Our goal is to ensure that your home or business needs are properly addressed and you receive the service you deserve.
Our Other Excellent Services
We strive to provide the best service possible for our clients. We believe in building a relationship because to us you aren’t just a number. We want to make sure you get the best product and service possible.
We provide a free evaluation with our findings as well as photos to help you get what you need.
Advance Insulation Canada is now COR certified in Alberta and British Columbia! We are also members of the ISNET World and Complyworks programs.
Concrete crack repairs
Foam jacking
Belly bag insulation remediation
Batt and Poly insulation
